====== 'ODROID-SHOW2' device ======


===== Parameters =====

^ Parameter ^ Value ^
| Bauds |500000 |
| Parity | None |
| Data bits | 8 |
| Stop bits | 1 |

All other parameters are ''OFF''.

===== Under 'Windows' =====

Under //Windows//, to configure the serial port correctly, launch ''mode com<n> 500000,n,8,1'', where //**<n>**// is the serial port number (launching ''mode'' displays the available ports).

It seems that above command sets some parameters to ''ON'', but it seems not to matter...


===== Under 'GNU/Linux' =====

Under //GNU/Linux//, to set the parameters for this device, launch ''stty -F /dev/ttyUSB<n> 500000''.
===== Firmware compilation=====

:!: Following instructions concern the //Arduino IDE//.

  * First, launch ''git clone %%https://github.com/hardkernel/ODROID-SHOW%%'' in a console,
  * Click on ''ODROID-SHOW/show_main/show_main.ino'' (should have be created by above command) ; this should launch the //Arduino IDE//,
  * ''File/Preferences/Settings/Sketchbook location:'' : set it to the above ''ODROID-SHOW'' directory,
  * ''Sketch/Import Library/Add Library.../'': point to above ''ODROID-SHOW'' directory.